Designed for maximum power output on Regular Fuel. The "Builders Choice" Engine Kits are set up with the novice builder in mind. Easy to assemble with predetermined compression ratio's, connecting rod length, camshaft and cylinder heads. The "Builder's Choice" engine kit takes all the guess-work out of building your own engine. Each kit is listed with the correct carburetor size, intake manifold, and exhaust type needed to achieve the advertised Horsepower output. Never before have engine-building secrets like these been let out to the public! Take advantage from years of engine building experience with the Builders Choice Engine Kit.

OEM Distributor Drive Pinions and Brass Distributor Drive Gears are NO LONGER AVAILABLE. Due to this, we can no longer supply them in the Builder's Choice Engine Kits.

All Kits come With Black Oil Pump covers and lightweight flywheels Unless specified otherwise.

Free Shipping does not apply to engine kits. We will contact you with a shipping quote when your order is ready to ship!

Features

1183 - 150 HP 2110cc Builders Choice Engine Kit includes:
2246 - Eagle Racing Camshaft (T-1)
1274 - AS41 Dual Relief Super Case - T-1 & 2 (82 x 90.5) Full Flowed
1289 - Super Race Rods (VW Journal) 5.400" length (set of 4)
1859 - Maxi 30 Full Flow Oil Pump
1278 - CB High Performance Case Kit
1537 - 28mm Ultralight Lifters (set of 8)
1941 - Rear Main Seal - 13, 15, & 1600cc
1804 - Main Bearings STD
1865 - Rod Bearings T/1 STD
1399 - Straight Cut Cam Gears
1565 - Racing Push Rod Tubes (set of 8)
1672d - Panchito 044 (40 x 35.5) 90.5/92 Bore (two heads) W/Dual Hi Rev Valve Springs
1770 - Thin Line Oil Sump - 1 1/2 qt.
1628 - Chromoly Push Rods - blank end (.035")
1053 - Super Big Bore Kit, 90.5 x 82mm
1030 True-Arc Wrist Pin Locks (set of 8)
1702D - C Channel Valve Covers (set of 2)
1999 - 8mm Deflector Plates - fits 13, 15, & 1600cc (set of 2)
1904 - Case Washer Set
1946 - Posi-Seal Cam Plug
1154 - Super Race Crank - 82mm Stroke - VW Journals
1299 - .040" Barrel Shims (90.5 & 92mm)
1387 - 92mm 0.040" thick - Copperhead Gaskets (set of 4)
1303 - Forged Chromoly Lightweight Flywheel - 200mm (o-ring seal)
1360 - Racing Gland Nut with washer
1229 - 8mm Chromoly Head Stud Kit - Dual Port
1849 - Racing Camshaft Bearing Set
1918 - Crankshaft Gear Assembly Kit w/Racer Spacer
1692 - CB Super Stock 1.25:1 Ratio - High Lift (Rocker Arms Only)
1643 - High Performance Rocker Shafts
1644 - Rocker Arm Spacers - fits 1.1:1 and 1.25:1 High Performance Rocker Shafts
1523 - Swivel Feet - Stock or 1.25 VW Rockers (set of 8)
1665 - Valve Adjusting Nuts - 8mm (set of 8)
1536 - Rocker Arm Block Shims (.060) (set of 4)
1362 - End Play Shim Kit
1908 - Case Lock Nut Kit
1277 - Engine Case Bolts (set of 3)
1973 - Gasket Set - 13, 15, & 1600cc Dual & Single Port Engines
LABOR-FLOW - Full Flow Case
HP rating is based on Dual 44mm IDF Carbs with match ported Big Beef Manifolds, 1 5/8" Merged Header, Compression is set at 8.8:1 using listed parts in kit. Premium fuel is required for this kit.

CB Performance 2110cc Builders Choice VW Engine Kit